Water Quality Tester TDS&EC , 3in1
Code ATES026- Weight 55.00g
E-shop price: 9,90 €
| Amount: | 3+ | 5+ |
| Price: | 8,81 | 7,00 |
| Item location: | ||
|---|---|---|
| Central warehouse in Kaunas | Item is not available (0) | |
| Shop in Vilnius | Item available (1) | |
| Shop in Kaunas | Item available (1) | |
Item description
The TDS&EC tester is a three-in-one device for measuring water quality. Measures total dissolved solids (PPM), conductivity (µS) and temperature (°C). The device uses microprocessor technology that performs measurements with high accuracy.
The water quality meter is simple and convenient to use in many areas:
- aquariums
- pharmacies
- cosmetics
- medicine
- analytical laboratories
It can be used to measure water in a tap, aquarium, swimming pool or natural springs. If the characteristics of the tested water do not change for 3 minutes, the device stops working and automatically switches off after 10 minutes of inactivity.
The measurement takes place at the water conductivity level, so you can check the amount of dissolved salts. Crystal clear water does not conduct electricity and as the amount of dissolved substances increases, ions appear in the water. The more anions and cations, the better the electrical conductivity. Results are given in ppm, i.e. i.e. amount of substance in ml per ml of water.
Values:
Water 0-170 PPM - perfect for consumption
Water 170-500 PPM is medium quality water
500 PPM and more - is contaminated water
Technical data:
Measuring range: 0-9990 ppm
Measurement accuracy: +/- 2%
Calibrated with NaCl solution 342 ppm
Conductivity: 0-9990 µS/cm
Temperature measurement range: 0-80°C
Temperature measurement range:: 32-176F
Temperature measurement resolution: 1°C
Automatic shutdown after 10 min
Power supply: 3V battery
Dimensions: 155 x 30 x 13 mm