Wireless 1-channel module 24V DC 433MHz
Code ADVM072- Weight 135.00g
E-shop price: 14,50 €
| Amount: | 3+ | 5+ |
| Price: | 13,05 | 10,10 |
| Item location: | ||
|---|---|---|
| Central warehouse in Kaunas | Item available (2) | |
| Shop in Vilnius | Item available (1) | |
| Shop in Kaunas | Item available (1) | |
Description
Description
Product Type: 1-channel (1 CH) wireless remote relay switch receiver with 2-button transmitter.
Coded System: 1527 learning code.
Operating Modes: Momentary, Toggle, Latched and Time Delay.
Modulation Mode: ASK.
Operating RF Frequency: 433 MHz.
Input Voltage: 24V DC
RF Working Mode: Superheterodyne receiver.
Receiver Sensitivity: > 97 dBm.
Transmitting Distance: > 100 m (open space).
Decoding Mode: MCU software decoding.
Remote Storage Capacity: Up to 20 remote controls.
Supported Remote Type: EV1527 learning-code transmitters.
Available Working Modes: Momentary, Toggle, Latched, Time Delay (5 s, 10 s, 15 s).
Output Terminals: NO, NC, COM.
PCB Dimensions: 35 × 30 × 18 mm (L × W × H).
Remote Control Power Supply: 2 × 3 V CR2016 button cells.
Operating Mode Descriptions
Momentary Mode: When the remote button is pressed, the relay switches ON (contacts close). When the remote button is released, the relay switches OFF (contacts open).
Toggle Mode: On the first press of the remote button, the relay switches ON. On the next press of the same button, the relay switches OFF.
Latched Mode: Pressing remote button A switches the relay ON. Pressing remote button B switches the relay OFF.
Time Delay Mode: When the remote button is pressed, the relay switches ON. After the button is released, the relay will automatically switch OFF after 5 s, 10 s or 15 s (according to the configuration).
Reset Function
The reset function clears all paired / learned remotes. After the data is cleared, no remote control can operate the receiver until it is paired again.
Reset Procedure:
Press the receiver’s learning button 8 times in succession. The receiver will erase all stored remote control data from its memory. When the receiver’s LED indicator flashes, the reset function is complete.