Lead Lithium Battery Capacity Indicator

• Long service life
• Easy to install

• Two indications available - percentage or volts (push-button switchable)Features: (voltages, currents - DC):

• Voltages: 8-70 V (reverse voltage protection)

• For lithium batteries: 12-60 V (3-16 rows)
• For lead-acid batteries: 12-48 V
• Operating current: 5-15mA (with backlight)
• Energy resolution: 1%
• Voltmeter accuracy: 1%
• Temperature range for operation: -20...+70 degrees
• Operating humidity: 10-80% (relative)
• Connect the black wire to the negative pole and the red wire to the positive pole
• Dimensions: approx. 50x24x8mm

Configuration

1. Press and hold the SET button.
2. Connect to the battery and enter the settings.
3. Briefly press the SET button to select the battery type:
   • P – Lead-Acid
   • L – Lithium-Ion
   • F – Lithium-Iron-Phosphate
4. After selecting the type, briefly press the Function button to change the number of cells.
5. Briefly press:
   • SET – increase the number of cells
   • Function – decrease the number of cells
6. Hold the Function button to enter the system settings mode.
7. Briefly press the SET button to switch system modes:
   • S-1 – display % and V alternately every 2 seconds
   • S-2 – turn off the display after 10 seconds
   • S-3 – turn backlight on/off
   • S-4 – turn logo on/off (reserved)
   • S-5 – select battery curve (reserved)
8. Briefly press the Function button to turn the system on/off.
9. Disconnect power to save parameters.
10. Reconnect power to display battery capacity percentage or voltage.
11. Briefly press the Function button to:
    • toggle the display between percentage and voltage
    • or turn the display off