Oscilloscope Probe FNIRSI P6100, 100MHz, 1X/10X
Code CLA202/61- Manufacturer FNIRSI
- Weight 70.00g
E-shop price: 9,50 €
| Amount: | 4+ | 8+ |
| Price: | 8,93 | 8,84 |
| Item location: | ||
|---|---|---|
| Central warehouse in Kaunas | Item available (4) | |
| Shop in Vilnius | Item available (3) | |
| Shop in Kaunas | Item available (3) | |
Description
FNIRSI® P6100 Oscilloscope Probe
The FNIRSI® P6100 is a universal oscilloscope probe designed for electronics testing, troubleshooting, repair work, laboratory measurements and educational use. With a selectable 1X / 10X attenuation switch, the probe can be used for both low-level signal observation and higher-voltage or higher-frequency measurements where lower circuit loading is required.
With a bandwidth of up to DC–100 MHz in 10X mode and a lower input capacitance, the P6100 is suitable for use with digital and analog oscilloscopes equipped with a standard BNC input. It is a practical accessory for electronics repair, microcontroller signal testing, power supply diagnostics, PWM signal observation, audio circuit analysis and general-purpose electronic measurements.
🔧 Key Features
- ✅ Selectable 1X / 10X attenuation
- ✅ Up to 100 MHz bandwidth in 10X mode
- ✅ Compatible with most oscilloscopes using a BNC input
- ✅ Adjustable compensation for accurate waveform reproduction
- ✅ Convenient 120 cm cable length
- ✅ Suitable for repair, diagnostics, laboratory and educational use
- ✅ Lightweight and compact for everyday measurements
📊 Technical Specifications
| Parameter | Value |
|---|---|
| Model | FNIRSI® P6100 |
| Type | Oscilloscope probe |
| Attenuation | 1X / 10X |
| Bandwidth | 1X: DC–6 MHz; 10X: DC–100 MHz |
| Input Resistance | 1X: 1 MΩ; 10X: 10 MΩ |
| Input Capacitance | 1X: 85 pF – 120 pF; 10X: 18.5 pF – 22.5 pF |
| Compensation Range | 10 pF – 30 pF |
| Rise Time | < 3.5 ns |
| Working Voltage | 1X: <200 V DC + AC peak; 10X: <600 V DC + AC peak |
| Cable Length | 120 cm |
| Weight | approx. 80 g |
| Color | Grey + Black |
| Operating Temperature | -10 °C ~ +50 °C |
| Storage Temperature | -20 °C ~ +75 °C |
| Package Includes | 1 × FNIRSI® P6100 Oscilloscope Probe |
⚙️ 1X and 10X Mode Usage
1X mode is useful when measuring lower-amplitude signals and when higher sensitivity is required. It is suitable for low-frequency signals, audio circuits, basic electronics troubleshooting and educational measurements.
10X mode attenuates the measured signal by a factor of 10, reduces the load on the circuit under test and allows higher-frequency measurements. The maximum 100 MHz bandwidth is available in 10X mode, making it the recommended setting for many accurate oscilloscope measurements.
🧰 Application Areas
- Electronics repair and troubleshooting
- Power supply diagnostics
- PWM, pulse and digital signal observation
- Testing Arduino, STM32, ESP32 and other microcontroller circuits
- Audio and low-frequency signal analysis
- Laboratory, educational and hobby projects
- Accessory for analog and digital oscilloscopes
📦 Package Contents
- 1 × FNIRSI® P6100 Oscilloscope Probe
📝 Note
For accurate measurements in 10X mode, it is recommended to adjust the probe compensation using the oscilloscope’s calibration signal. Proper compensation helps reproduce square waves correctly and reduces waveform distortion.