Adjustable DC 6V-30V 5A PWM Speed Controller with Digital Display
Code ABREG05- Manufacturer Unspecified
- ID code Does not apply
- Weight 55.00g
E-shop price: 7,50 €
| Amount: | 5+ | 10+ |
| Price: | 6,83 | 6,36 |
Minimum order: 1 Repeatability : 1
Amount
| Item location: | ||
|---|---|---|
| Central warehouse in Kaunas | Item available (2) | |
| Shop in Vilnius | Item available (2) | |
| Shop in Kaunas | Item available (3) | |
Description
- CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
- Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions.
- The display range of 3-digit LED display is ''000-100''. (For example, displayed ''066'' as the picture 1, it means that the PWM output duty cycle is 66%.)
- Adjustable speed range is 0%-100%. Suitable for the DC motor (or DC load) within 5A, Peak current 8A.
- Incorporate a push key. Push closed, and then push open.
Specification:
- Type: PWM DC Motor Controller
- Color : black
- Size : about 794225mm/3.111.650.98''
- Net weight: about 58g
- Input supply voltage: 6V-30VDC
- The maximum output power: 240W
- The maximum continuous output current: 5A;(Crest value current 8A),
- The LED display the duty ratio 0-100%
- PWM frequency: 16kHz
- Duty Cycle adjustable: 0%-100%
Operating instruction:
Before you attempting to wire the controller, make sure power is off
1. Connect wires refer to the ''wiring diagram''
2. Turn on the power, and adjust the potentiometer
3. The LED display displays the PWM output duty cycle
4. Push the key, the controller closed, push it again, the controller open
Warning:
- Do not Reverse positive and negative power loads.
- This will damage the controller to change motor decription.
- Interchange the positive and negative wires of motors.