The website uses cookies for smooth operation, improved browsing experience, marketing. More about cookies used and how to opt out it - Privacy policy

ESP32-CAM WiFi + Bluetooth Camera Module OV2640

Code ABRM24
  • Manufacturer DFROBOT
  • ID code DFR0602
  • Weight 10.00g

E-shop price: 14,90

Amount: 3+ 5+
Price: 13,41 12,37
Minimum order: 1 Repeatability : 1

Amount
Item location:
Central warehouse in Kaunas Item available (13)
Shop in Vilnius Item available (4)
Shop in Kaunas Item available (4)

Item description

  1. ESP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
  2. ESP integrates WiFi, traditional Bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
  3. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
  4. ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications.

Features:

  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • Low-power dual-core 32-bit CPU for application processors
  • Up to 240MHz, up to 600 DMIPS
  • Built-in 520 KB SRAM, external 4M PSRAM
  • Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
  • Support OV2640 and OV7670 cameras with built-in flash
  • Support for images WiFI upload -Support TF card
  • Support multiple sleep modes
  • Embedded Lwip and FreeRTOS
  • Support STA/AP/STA+AP working mode
  • Support Smart Config/AirKiss One-click distribution network
  • Support for serial local upgrade and remote firmware upgrade (FOTA)
  • Support secondary development

Product Specifications:

  • Module model ESP32-CAM
  • Package DIP-16
  • Size 2740.54.5(±0.2)mm
  • SPI Flash default 32Mbit
  • RAM internal520KB+external 4M PSRAM
  • Bluetooth bluetooth4.2BR/EDR and BLE standards
  • Wi-Fi 802.11 b/g/n/e/i
  • Support interface UART, SPI, I2C, PWM
  • Support TF card Maximum support 4G
  • IO port 9
  • Serial port rate default 115200 bps
  • Image output format JPEG (only supported by OV2640), BMP, GRAYSCALE
  • Spectrum range 2412 ~ 2484MHz
  • Antenna form onboard PCB antenna , gain 2dBi
  • Transmit power 802.11b: 17±2 dBm (@11Mbps)
    802.11g: 14±2 dBm (@54Mbps)
    802.11n: 13±2 dBm (@MCS7)
  • Receiving sensitivity: CCK, 1 Mbps : -90dBm
    C- CK, 11 Mbps: -85dBm
    6 Mbps (1/2 BPSK): -88dBm
    54 Mbps (3/4 64-QAM): -70dBm
    MCS7 (65 Mbps, 72.2 Mbps): -67dBm
  • Power consumption: Turn off the flash: 180mA@5V
    Turn on the flash and adjust the brightness to the maximum: 310mA@5V
    Deep-sleep: The lowest power consumption can reach 6mA@5V
    Moderm-sleep: up to 20mA@5V
    Light-sleep: up to 6.7mA@5V
  • Security: WPA/WPA2/WPA2-Enterprise/WPS
  • Power supply range 5V
  • Operating temperature -20 °C ~ 85 °C
  • Storage environment -40 °C ~ 90 °C, < 90%RH

Specification