Lithium battery for Mitsubishi ER6V equipment, 3.6 V, AA, with leads and connector
Code BLC145/LJ- Weight 40.00g
E-shop price: 13,25 €
| Item location: | ||
|---|---|---|
| Central warehouse in Kaunas | Item available (10) | |
| Shop in Vilnius | Item is not available (0) | |
| Shop in Kaunas | Item is not available (0) | |
Description
Lithium battery for Mitsubishi ER6V equipment, 3.6 V, AA, with leads and connector
This Mitsubishi ER6V-type lithium battery is designed to provide memory backup power for compatible industrial controllers, CNC equipment and other electronic systems when the main power supply is switched off. It uses a 3.6 V lithium thionyl chloride (Li-SOCl₂) cell with low self-discharge, making it suitable for long-term, low-current applications. The battery is supplied with two connecting leads and a connector for installation in compatible Mitsubishi equipment.
Key specifications: 3.6 V • 2600 mAh • Li-SOCl₂ • AA (14500) • 2 leads with connector
Key features and benefits
- 3.6 V nominal voltage – designed for backup power circuits in compatible electronic controllers and other industrial equipment.
- High nominal capacity – 2600 mAh, depending on the cell used, supporting long-term, low-current applications.
- Low self-discharge – Li-SOCl₂ chemistry helps retain energy during extended storage or operation in low-power systems.
- Memory backup – helps retain stored controller data when the main power supply is interrupted, provided the equipment supports battery-backed memory.
- AA-size cell – cylindrical 14500 format commonly used in industrial electronic backup power systems.
- Connecting leads with connector – ready for connection to equipment fitted with a matching battery connector.
Applications
The battery is intended for memory backup in compatible Mitsubishi PLCs, CNC controllers and other industrial automation equipment. It is suitable for systems requiring the retention of program data, settings or other battery-backed information when the main power supply is disconnected.
Compatibility and limitations
The supplier lists this product as a replacement for Mitsubishi ER6V-type batteries, including ER6V-C4 and BKO-NC2157H01 references.
Before ordering, verify the original battery model, nominal voltage, connector design, pin arrangement and polarity. Matching ER6V markings or AA dimensions alone do not guarantee compatibility with every Mitsubishi device.
This is a non-rechargeable battery and is not suitable for equipment requiring rechargeable batteries or a different supply voltage.
Technical specifications
| Parameter | Specification |
|---|---|
| Battery type | Primary lithium battery |
| Chemistry | Lithium thionyl chloride (Li-SOCl₂) |
| Nominal voltage | 3.6 V |
| Cell model | SAFT LS14500 |
| Nominal capacity | 2600 mAh (SAFT) |
| Nominal capacity test conditions | 2 mA, +20 °C, 2.0 V cut-off |
| Maximum recommended continuous discharge current | 50 mA (SAFT) |
| Pulse discharge capability | up to 250 mA (SAFT) |
| Cell size | AA (14500) |
| Number of cells | 1 |
| Cell operating temperature | –60 to +85 °C (SAFT) |
| Electrical connection | 2 leads with connector |
| Rechargeable | No |
Note: Capacity and discharge characteristics depend on the installed cell and operating conditions. The SAFT 250 mA pulse capability is specified for 0.1-second pulses every 2 minutes at +20 °C with a 10 µA base current. The temperature ranges refer to the individual cells.
Important usage and safety information
- Do not recharge, short-circuit, disassemble, crush or incinerate the battery.
- Observe the correct polarity and follow the equipment manufacturer's battery replacement instructions.
- Before replacing the battery, check whether the equipment retains its data without backup power. Incorrect replacement procedures may result in data loss.
- Dispose of used batteries through an appropriate battery collection or recycling facility.
Package contents
- 1 × Mitsubishi ER6V-type 3.6 V lithium battery with two leads and connector.