OSCILLOSCOPE - MULTIMETER FNIRSI DSO-TC3, 500kHz

The Fnirsi DSO-TC3 is both a multitester and a digital oscilloscope. The multitester includes an electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement and infrared decoding. The DSO-TC3 is small and easy to carry and can be used for power measurements and repairs. The DSO-TC3 has a built-in battery of 1500 mAh with which you can use the device for 6 hours and it can be charged with a USB-C charger. Also, this multitester has a MCX connector and a 2.4" TFT color display.

Oscilloscope:
The oscilloscope has a real-time sample frequency of 10MSa/s and a bandwidth of 500kHz. It has a test voltage range of 400V AC/DC with the included probe and has a trigger function. The measured waveform can be displayed on the 2.4" screen without adjustments.

Multitester:
The multitester can test many different components, such as resistors, capacitors, coils and transistors. It has 6 different major waveforms, the square wave, triangle wave, pulse wave, sine wave, ramp wave and DC. The DSO-TC3 has an adjustable output frequency of 1-100kHz and an adjustable voltage of 3.3V.

Specifications:
Bandwidth: 500 kHz
Channels: 1
Output signals: Square, triangle, pulse, sine, ramp and DC
Sample rate: 10 MSa/s
Vertical scale: 10 mV/div - 10 V/div
Horizontal scale: 1 μs/div - 10 s/div
Trigger mode: Auto / Normal / Single
Resistor: 0.01 Ω - 50 MΩ
Capacitor: 5 pF - 100 mF
Inductor: 10 μH - 1000 mH
Battery: 0.1 V - 4.5 V
Input voltage: 0 V - 40 V
Displayl: 2.4" TFT color
Dimensions: 103 x 79 x 31 mm

Accessories:
1x DSO-TC3
1x P6100 oscilloscope probe
3x testclamps
1x USB-C cable